| Cleveland
Vibrator Company
Vibratory Equipment
[CVC] > [General
Info] > [Electro-Mechanical Screeners]
Electro-Mechanical
Screeners:-
The Cleveland
Vibrator Company model EMS Electro-Mechanical Screener Feeders
with twin motor drives, are designed for precise screening
where high efficiency is required in the end particle size.
Units are mounted horizontally, requiring no gravitational
assistance for product conveyance along the screening surface.
EMS Screeners are typically equipped with 1800 RPM vibrators
that provide 0.10" stroke. Force output of the drives
may be varied to decrease stroke, thereby reducing final conveying
speed.
Standard
Designs:-
Included
in the standard EMS:
- Impact
plate at inlet area for product loading.
- Isolators
with support base included.
- Below
deck mounted, twin, dust-tight 1800 RPM drives.
- Mild
steel construction with factory painted finish.
- Twin
motor starter for manual on-off operation.
- Replaceable
screen decks.
Special
Designs:-
For difficult-to-handle,
light-density, fluffy products, or where large screen openings
(i.e. one inch square opening screens or larger) are being
used, lower frequency, higher amplitude drives may be substituted.
For these types of applications, 900 and 1200 RPM drives are
available as an option. Drives can be mounted above or below
the screening surface.
Optional
Features:-
Circular
inlets and outlets.
Right or left-hand outlets.
Above deck or side mounted drives.
Air-spring base mounting or overhead coil spring suspension
mounting.
Dust-tight covers and sight ports.
Booted inlets and outlets for dust containment.
Tension wedges for quick changing of screen decks.
Variable frequency controls to vary the feed rate.
Ball tray decks to reduce screen "plug" blinding.
|
